STM 6400 SeaWorker is a high-speed multi-purpose motor boat.

The  boat can be used as a day-to-day transport
vessel, pilot boat, hydrographic, fishing, diving boat, etc.

It  is  intended  for operation in sea coastal zones and on large
lakes with operation range of more than 20 miles.

The  two hulls of this catamaran have three pairs of spray rails. The boat
dimensions allow its trailer-towing.

The  boat  has  a  glassed  cabin  providing  good visibility and seating
for 4 persons. Here the boat control panel and the 4 seats are
located.

The boat features extensive, spacious, board-to-board cockpit. It
contains lockers for moorings,  anchors  and  other equipment storage,
and seats for 3 passengers.

The  stern  platform  allows easy access to the engine, comfortable
boarding and unboarding, and diving.

The maximum speed with minimum load is about 35-40 knots, 25-30 knots under full load.

Outboard motor or a water-jet drive can be used on this boat as the main engine.

With a water-jet drive mounted, STM 6400 SeaWorker has a very small
draft without losing its perfect seaworthy qualities that allow to use
STM 6400 SeaWorker in difficult conditions, in rough seas, shallow
waters over complicated sea-bottom relief - on shoals, in tidal zones,
large rivers estuaries and narrows.

Four  types  of  power  units can be used on the boat depending on the
vessel's  usage  mode  (three  types  for outboard motors, one - for a
fixed engine):
 

1)      two engines 115 h.p. each;

2)      two engines 135 h.p. each;

General view (*.pdf format)

Booklet (*.pdf format)